Regulatory ESSENTIAL



Regulatory ESSENTIALS - modular information package with all the essential information for compliant products in your target market. Conveniently read online at Product-Compliance-Portal ROGER WILLCO.

Boilers; ASME boiler and pressure vessel code; cryogenic containers; pressure equipment; steam generators; Pi mark; BPVC; Unfired pressure vessel

layoutpicture
Scope: This ESSENTIAL describes the safety requirements of pressure equipment in Singapore, based on the following legislation and information: - Workplace Safety and Health Act - Workplace Safety and Health (General Provisions) Regulations - Guidelines for the registration of pressure vessel in workplaces (published by: Ministry of Manpower)

Stakeholders: Manufacturer, Importer, Operator
Legislation in force: The Workplace Safety and Health Act - Definitions: “machinery” includes (b) any steam boiler, gas cylinder, air receiver, steam receiver, steam container or refrigerating plant pressure receiver; “pressure vessel” (a) means any container or vessel used for containing any substance under pressure; and (b) includes any steam boiler, steam receiver, steam container, air receiver, refrigerating plant pressure receiver and gas cylinder; Fifth Schedule - Machinery, Equipment or Hazardous Substances Part 1- Machinery and Equipment 6. Any equipment or piping intended for operation under pressure, including all statutory pressure vessels 7. Any equipment or piping intended to contain corrosive, toxic or flammable substances Art.16) Duties of manufacturers and suppliers of machinery, equipment or hazardous substances used at work (1) Subject to this section, it is the duty of any person who manufactures or supplies any machinery, equipment or hazardous substance for use at work to ensure, so far as is reasonably practicable — (b) that the machinery, equipment or hazardous substance is safe, and without risk to health, when properly used; (c) that the machinery, equipment or hazardous substance is examined and tested so as to comply with the obligation imposed by paragraph (b). (9) This section applies only to machinery, equipment or hazardous substances specified in the Fifth Schedule. Workplace Safety and Health (General Provisions) Regulations Art.27 Conditions before steam boiler, steam receiver, air receiver or refrigerating plant pressure receiver may be used (1) Subject to paragraph (2), it shall be the duty of the owner of any steam boiler, steam receiver, air receiver or refrigerating plant pressure receiver (referred to in this regulation as relevant equipment) who intends to put the relevant equipment into use in a workplace to — (a) obtain, in such form and manner as may be determined by the Commissioner, the approval of the Commissioner to use the relevant equipment; (b) ensure that such examination and test by an authorised examiner as may be specified by the Commissioner has been satisfactorily carried out; (c) obtain from the authorised examiner a report of the examination and test referred to in sub-paragraph (b), specifying the safe working pressure of the relevant equipment and stating the nature of the tests to which the relevant equipment and its fittings have been submitted; (d) keep the report referred to in sub-paragraph (c) available for inspection; and (e) mark the relevant equipment so as to enable it to be identified as the relevant equipment to which the report refers. Art.28) Steam Boilers Art.29) Steam Receivers Art.30) Steam Containers Art.31A) Extension of time for examination of steam boilers, steam receivers and air receivers Art.32) Periodical examinations when authorised examiner is not available Art.33) Pressure vessel containing hazardous substance Art.34) Pipes and equipment conveying certain substances Art.35) Gas plants Art.36) Repair of pressure vessel Art.37) Prevention of fire Art.38) Safety provisions in case of fire

Application national: Singapore, Registration of Pressure Vessels in Workplaces

Countries: Image for SG Singapore,  
Status: Published 2023-04-14 by Anette Dunkel-Reinboth and Torsten Sahm
Last change 2024-11-07 by Anette Dunkel-Reinboth: Legislation in force for this PCT, Fluid systems and components
ROGER WILLCO ID: #cx6b
Price 30 day license for 89.00 € NET net

ANY QUESTIONS?

essentials@globalnorm.de

+49 30 3229027-50




Buy a 30 day license for 89.00 € net now ...




Scope of this ESSENTIAL
This ESSENTIAL describes the safety requirements of pressure equipment in Singapore, based on the following legislation and information:
- Workplace Safety and Health Act
- Workplace Safety and Health (General Provisions) Regulations
- Guidelines for the registration of pressure vessel in workplaces (published by: Ministry of Manpower)'

Analysis of regulatory requirements

Legislation in force for this PCT
Here you will get a linked document in ROGER WILLCO
(only reachable with additional ROGER WILLCO license)

Are legal provisions regulates the product compliance topic? If yes, what is the reference (title, number)?

Responsible actors
Here you will get textual information

Which actor(s) are responsible for compliance with the legal provisions: e. g. - economic operators (manufacturer, importer, distributor, fulfilment service provider), - user (commercial/industrial/professional), - user (private, consumer)?

Regulatory market access conditions for the actor(s)
Here you will get textual information

What are the main regulatory requirements (e. g. conformity assessment fulfilment of essential requirements of Annex I 2006/42/EC) prior placing on the market, importation and putting into service (brief description)

Exemption clauses
Here you will get textual information

Exempted devices/products or industry sectors.

Sub-federal legislation of states/counties
Here you will get textual information

E. g. by 2019 an Inter-Governmental Agreement (IGA) on governance of the Electrical Equipment Safety System (EESS) has been signed by Queensland, Victoria, Western Australia and Tasmania.

FTA/MRA status with EU
Here you will get textual information

Has the country signed a Free Trade Agreement (FTA) or a Mutual recognition agreement (MRA) with EU?

FTA/MRA status with EU
Here you will get related hyperlink(s)

Has the country signed a Free Trade Agreement (FTA) or a Mutual recognition agreement (MRA) with EU?

Authority
Here you will get related hyperlink(s)

Name of the authority for approval, registration, market surveillance and/or enforcement

Link/Reference to other reference document(s)
Here you will get related hyperlink(s)

Route to compliance

Formal and administrative requirements

Registration at related authority required?
Here you will get related hyperlink(s)

Product registration? Manufacturer registration? Importer / Representative registration? if required.

Local representative legally required?
Here you will get textual information

[Yes/No]

Equipment authorization (approval process)

Approval process (conformity assessment procedure)
Here you will get a image or chart

Means each legally required approval process prior placing on the market, importation or putting into service

Conformance document(s) to show compliance to the authority
Here you will get textual information

e. g. SDoC, technical documentation (for 10 years), filled-in approval forms (e. g. ACMA in AUT)

Conformance document validity and renewal
Here you will get a image or chart

Validity for Conformance document name mentioned. For mandatory certification validity is important.

Which documents are required by an approval body?
Here you will get textual information

e .g. formal application

Is a factory inspection legally required
Here you will get textual information

Accepted Construction Model
Here you will get textual information

e.g. ASME BPVC, PED, AD2000

Testing & Standards

Specific requirements for testing
Here you will get textual information

e. g. is an accredited test lab. mandatory, limits, test samples, product description

General information to the application of standards
Here you will get textual information

e. g. China: GB standards are mandatory, EU: harmonized standards shall be published in the OJEU with respect to "presumption of conformity"

Is in-country testing legally required?
Here you will get textual information

Source for standards for conformity assessment
Here you will get textual information

Acceptance of foreign test reports
Here you will get related hyperlink(s)

Regulatory labelling, markings and user information

Regulatory label (mandatory)
Here you will get textual information

e. g. product label

Required information on the product and/or packaging
Here you will get textual information

e. g. address of the manufacturer/importer, serial number

User instructions language(s)
Here you will get textual information

Regulated by the legal provisions

User instruction requirements and specific compliance notes
Here you will get textual information

Form, sentence inside, simple text. E. g. FCC/ISED compliance information, SAR information, battery, environmental information like waste

Warnings, symbols
Here you will get textual information

e. g. ANSI Z 535.4


Code, ContinentSGP,
Economic Area
Official LanguageMalay , Mandarin, Tamil and English - Republic of Singapore Independence Act 1965 | https://sso.agc.gov.sg/Act/RSIA1965?ProvIds=pr7-.
Standard InstituteSingapore Standards Council (SCC), Enterprise Singapore | https://www.singaporestandardseshop.sg/
HS CodememberYes






GLOBALNORM COMPLIANCE
GLOBALNORM ACADEMY
GLOBALNORM GmbH

Keep abreast of new and changed requirements and thus act proactively.
Our ACADEMY offers training in a format to suit you – for a direct knowledge transfer from our experts to your company.
Minimize risk, conserve resources, and grow successfully with an understanding of standards and market approval requirements.




Top of the page

© 2024 Globalnorm GmbH