Regulatory ESSENTIAL



Regulatory ESSENTIALS - modular information package with all the essential information for compliant products in your target market. Conveniently read online at Product-Compliance-Portal ROGER WILLCO.

Electrical safety of devices; Electrical safety of equipment; Safety requirements; Electrical shock; Burning behaviour; IP-class; Electrically caused burn; Thermal burn; Sharp edges; Risk of tipping
Scope: This ESSENTIAL describes the legal obligations for manufacturers and importers and the regulatory requirements for electrical equipment as specified in the technical regulations of New Zealand, esp. the Electricity (Safety) Regulations 2010 Regulated voltages: Low voltage: 50 Vac / 120 Vdc up to 1000 VAC / 1500 Vdc (different value for Mining Equipment) Extra low voltage: Below 50 Vac / 120 Vdc In the act ist worker health described, but it is not part of this Essential.

Stakeholders: Manufacturer, Importer, B2C products, B2B products
Legislation in force: Electricity Act 1992 Electricity (Safety) Regulations 2010 The regulations describe requirements both for appliances and electrical work (installations)

Application national: New Zealand, electrical safety, RCM mark, ERAC/EESS, WorkSafe

Countries: Image for NZ New Zealand,  
Comment on the comparability to EU legislation: Extra low voltage equipment is regulated in NZLbut nut in this way inside EU There is a mandatory registration system (EESS). The technical requirements for devices are almost based on IEC standards which also used inside EU....
Status: Published 2020-06-24 by Anette Dunkel-Reinboth and Torsten Sahm
Last change 2024-03-08 by Torsten Sahm: Hint to voluntary certification scheme , Electrical safety
ROGER WILLCO ID: #k962
Price 30 day license for 89.00 € NET net

ANY QUESTIONS?

essentials@globalnorm.de

+49 30 3229027-50



 


Buy a 30 day license for 89.00 € net now ...




Scope of this ESSENTIAL
This ESSENTIAL describes the legal obligations for manufacturers and importers and the regulatory requirements for electrical equipment as specified in the technical regulations of New Zealand, esp. the Electricity (Safety) Regulations 2010
Regulated voltages:
Low voltage: 50 Vac / 120 Vdc up to 1000 VAC / 1500 Vdc (different value for Mining Equipment)
Extra low voltage: Below 50 Vac / 120 Vdc

In the act ist worker health described, but it is not part of this Essential.'

Abbreviations
Here you will get textual information

Important abbreviations which are special for this legislation or theme.

Analysis of regulatory requirements

Legislation in force for this PCT
Here you will get a linked document in ROGER WILLCO
(only reachable with additional ROGER WILLCO license)

Are legal provisions regulates the product compliance topic? If yes, what is the reference (title, number)?

Scope of legislation
This ESSENTIAL describes the legal obligations for manufacturers and importers and the regulatory requirements for electrical equipment as specified in the technical regulations of New Zealand, esp. the Electricity (Safety) Regulations 2010'

Responsible actors
Here you will get textual information

Which actor(s) are responsible for compliance with the legal provisions: e. g. - economic operators (manufacturer, importer, distributor, fulfilment service provider), - user (commercial/industrial/professional), - user (private, consumer)?

Regulatory market access conditions for the actor(s)
Here you will get textual information

What are the main regulatory requirements (e. g. conformity assessment fulfilment of essential requirements of Annex I 2006/42/EC) prior placing on the market, importation and putting into service (brief description)

Penalty by this legislation
Here you will get textual information

What are the possible penalties (e. g. sales ban, fines) in the case of non-compliance?

Exemption clauses
Here you will get textual information

Exempted devices/products or industry sectors.

Sub-federal legislation of states/counties
Here you will get textual information

E. g. by 2019 an Inter-Governmental Agreement (IGA) on governance of the Electrical Equipment Safety System (EESS) has been signed by Queensland, Victoria, Western Australia and Tasmania.

FTA/MRA status with EU
Here you will get related hyperlink(s)

Has the country signed a Free Trade Agreement (FTA) or a Mutual recognition agreement (MRA) with EU?

FTA/MRA status with EU
Here you will get a linked document in ROGER WILLCO
(only reachable with additional ROGER WILLCO license)

Has the country signed a Free Trade Agreement (FTA) or a Mutual recognition agreement (MRA) with EU?

Authority
Here you will get related hyperlink(s)

Name of the authority for approval, registration, market surveillance and/or enforcement

Market surveillance authority
Here you will get related hyperlink(s)

Name of the authority for market surveillance and/or enforcement

Link/Reference to other reference document(s)
Here you will get textual information

Comment on the comparability to EU legislation
Here you will get textual information

Hints
Here you will get textual information

Specific recommendations, information or most common mistakes

Route to compliance

Formal and administrative requirements

Registration at related authority required?
Here you will get related hyperlink(s)

Product registration? Manufacturer registration? Importer / Representative registration? if required.

Local representative legally required?
Here you will get textual information

[Yes/No]

Hints
Here you will get textual information

Specific recommendations, information or most common mistakes

Equipment authorization (approval process)

Approval process (conformity assessment procedure)
Here you will get textual information

Means each legally required approval process prior placing on the market, importation or putting into service

Is the IECEE CB Scheme accepted by the authority/approval body?
Here you will get textual information

"[Yes/ No / no information available] [Text] Information (website)"

Conformance document(s) to show compliance to the authority
Here you will get textual information

e. g. SDoC, technical documentation (for 10 years), filled-in approval forms (e. g. ACMA in AUT)

Conformance document validity and renewal
Here you will get textual information

Validity for Conformance document name mentioned. For mandatory certification validity is important.

Which documents are required by an approval body?
Here you will get textual information

e .g. formal application

Is a factory inspection legally required
Here you will get textual information

Hints
Here you will get textual information

Specific recommendations, information or most common mistakes

Hints
Here you will get related hyperlink(s)

Specific recommendations, information or most common mistakes

Testing & Standards

Specific requirements for testing
Here you will get textual information

e. g. is an accredited test lab. mandatory, limits, test samples, product description

General information to the application of standards
Here you will get textual information

e. g. China: GB standards are mandatory, EU: harmonized standards shall be published in the OJEU with respect to "presumption of conformity"

National Standardisation Organisation
Here you will get related hyperlink(s)

Link to organisation

Are national standards based on IEC/ISO standards?
Here you will get textual information

Undetailed information

Is in-country testing legally required?
Here you will get textual information

Acceptance of foreign test reports
Here you will get textual information

Hints
Here you will get related hyperlink(s)

Specific recommendations, information or most common mistakes

Regulatory labelling, markings and user information

Regulatory label (mandatory)
Here you will get a image or chart

e. g. product label

Regulatory e-labelling allowed?
Here you will get textual information

e. g. put the regulatory information and labels in a software menu

Required information on the product and/or packaging
Here you will get textual information

e. g. address of the manufacturer/importer, serial number

User instructions language(s)
Here you will get textual information

Regulated by the legal provisions

User instruction requirements and specific compliance notes
Here you will get textual information

Form, sentence inside, simple text. E. g. FCC/ISED compliance information, SAR information, battery, environmental information like waste

Warnings, symbols
Here you will get textual information

e. g. ANSI Z 535.4

Hints
Here you will get related hyperlink(s)

Specific recommendations, information or most common mistakes


Code, ContinentNZL, Australia
Economic AreaANZCERTA (FTE with Australia)
Official LanguageEnglish, Maori
Standard InstituteStandards New Zealand | https://www.standards.govt.nz/
HS CodememberYes - since 1963






GLOBALNORM COMPLIANCE
GLOBALNORM ACADEMY
GLOBALNORM GmbH

Keep abreast of new and changed requirements and thus act proactively.
Our ACADEMY offers training in a format to suit you – for a direct knowledge transfer from our experts to your company.
Minimize risk, conserve resources, and grow successfully with an understanding of standards and market approval requirements.




Top of the page

© 2024 Globalnorm GmbH