Scope of this ESSENTIAL

This ESSENTIAL describes the regulatory requirements of the EU Machinery Directive 2006/42/EC (MD) with all related amendments (2020) for the product category 1 and the legal obligations for manufacturers. For uncompleted machinery the "ESS EEA Machine Safety - Product Cat. 2" is applicable. For the purposes of the MD, machinery (product category 1) designates the products listed in Article 1 section 1 (a) to (f). '

Hints

Here you will get a linked document in ROGER WILLCO (only reachable with additional ROGER WILLCO license) Specific recommendations, information or most common mistakes

Analysis of regulatory requirements

Legislation in force for this PCT

Here you will get a linked document in ROGER WILLCO (only reachable with additional ROGER WILLCO license) Are legal provisions regulates the product compliance topic? If yes, what is the reference (title, number)?

Scope of legislation

The Directive applies to the following products (article 1 section 1): (a) machinery (b) interchangeable equipment (c) safety components (d) lifting accessories (e) chains ropes and webbing (f) removable mechanical transmission devices and (g) partly completed machinery. '

Responsible actors

Here you will get textual information Which actor(s) are responsible for compliance with the legal provisions: e. g. - economic operators (manufacturer, importer, distributor, fulfilment service provider), - user (commercial/industrial/professional), - user (private, consumer)?

Regulatory market access conditions for the actor(s)

Here you will get textual information What are the main regulatory requirements (e. g. conformity assessment fulfilment of essential requirements of Annex I 2006/42/EC) prior placing on the market, importation and putting into service (brief description)

Exemption clauses

Here you will get textual information Exempted devices/products or industry sectors.

Sub-federal legislation of states/counties

Here you will get textual information E. g. by 2019 an Inter-Governmental Agreement (IGA) on governance of the Electrical Equipment Safety System (EESS) has been signed by Queensland, Victoria, Western Australia and Tasmania.

FTA/MRA status with EU

Here you will get textual information Has the country signed a Free Trade Agreement (FTA) or a Mutual recognition agreement (MRA) with EU?

Authority

Here you will get related hyperlink(s) Name of the authority for approval, registration, market surveillance and/or enforcement

Authority

Here you will get related hyperlink(s) Name of the authority for approval, registration, market surveillance and/or enforcement

Link/Reference to other reference document(s)

Here you will get a linked document in ROGER WILLCO (only reachable with additional ROGER WILLCO license)

Link/Reference to other reference document(s)

Here you will get a linked document in ROGER WILLCO (only reachable with additional ROGER WILLCO license)

Hints

Here you will get related hyperlink(s) Specific recommendations, information or most common mistakes

Route to compliance

Formal and administrative requirements

Registration at related authority required?

Here you will get textual information Product registration? Manufacturer registration? Importer / Representative registration? if required.

Local representative legally required?

Here you will get textual information [Yes/No]

Hints

Here you will get textual information Specific recommendations, information or most common mistakes

Equipment authorization (approval process)

Approval process (conformity assessment procedure)

Here you will get a image or chart Means each legally required approval process prior placing on the market, importation or putting into service

Conformance document(s) to show compliance to the authority

Here you will get textual information e. g. SDoC, technical documentation (for 10 years), filled-in approval forms (e. g. ACMA in AUT)

Conformance document validity and renewal

Here you will get textual information Validity for Conformance document name mentioned. For mandatory certification validity is important.

Which documents are required by an approval body?

Here you will get textual information e .g. formal application

Is a factory inspection legally required

Here you will get textual information

Testing & Standards

Specific requirements for testing

Here you will get textual information e. g. is an accredited test lab. mandatory, limits, test samples, product description

General information to the application of standards

Here you will get textual information e. g. China: GB standards are mandatory, EU: harmonized standards shall be published in the OJEU with respect to "presumption of conformity"

Is in-country testing legally required?

Here you will get textual information

Source for standards for conformity assessment

Here you will get related hyperlink(s)

Acceptance of foreign test reports

Here you will get textual information

Hints

Here you will get related hyperlink(s) Specific recommendations, information or most common mistakes

Regulatory labelling, markings and user information

Regulatory label (mandatory)

Here you will get a image or chart e. g. product label

Required information on the product and/or packaging

Here you will get textual information e. g. address of the manufacturer/importer, serial number

User instruction requirements and specific compliance notes

Here you will get textual information Form, sentence inside, simple text. E. g. FCC/ISED compliance information, SAR information, battery, environmental information like waste

Warnings, symbols

Here you will get textual information e. g. ANSI Z 535.4

User instructions language(s)

Here you will get a table Regulated by the legal provisions

Code, Continent	EEA,
Economic Area
Official Language	24 official languages
Standard Institute
HS Codemember