Scope of this ESSENTIAL

This ESSENTIAL describes the ype approval process for non-automated weighing instruments (NAWI) based on the laws and regulations listed in this CRF.'

Analysis of regulatory requirements

Measuring Device Type

Here you will get textual information e. g. NAWI, AWI

Legislation in force for this PCT

Here you will get a linked document in ROGER WILLCO (only reachable with additional ROGER WILLCO license) Are legal provisions regulates the product compliance topic? If yes, what is the reference (title, number)?

Responsible actors

Here you will get textual information Which actor(s) are responsible for compliance with the legal provisions: e. g. - economic operators (manufacturer, importer, distributor, fulfilment service provider), - user (commercial/industrial/professional), - user (private, consumer)?

Regulatory market access conditions for the actor(s)

Here you will get textual information What are the main regulatory requirements (e. g. conformity assessment fulfilment of essential requirements of Annex I 2006/42/EC) prior placing on the market, importation and putting into service (brief description)

Exemption clauses

Here you will get textual information Exempted devices/products or industry sectors.

Sub-federal legislation of states/counties

Here you will get textual information E. g. by 2019 an Inter-Governmental Agreement (IGA) on governance of the Electrical Equipment Safety System (EESS) has been signed by Queensland, Victoria, Western Australia and Tasmania.

FTA/MRA status with EU

Here you will get textual information Has the country signed a Free Trade Agreement (FTA) or a Mutual recognition agreement (MRA) with EU?

Authority

Here you will get textual information Name of the authority for approval, registration, market surveillance and/or enforcement

Link/Reference to other reference document(s)

Here you will get a linked document in ROGER WILLCO (only reachable with additional ROGER WILLCO license)

Link/Reference to other reference document(s)

Here you will get textual information

Link/Reference to other reference document(s)

Here you will get related hyperlink(s)

Hints

Here you will get textual information Specific recommendations, information or most common mistakes

Route to compliance

Formal and administrative requirements

Registration at related authority required?

Here you will get textual information Product registration? Manufacturer registration? Importer / Representative registration? if required.

Local representative legally required?

Here you will get textual information [Yes/No]

Member of International Metrology Organizations

Here you will get textual information e.g. OIML

Hints

Here you will get textual information Specific recommendations, information or most common mistakes

Equipment authorization (approval process)

Approval process (conformity assessment procedure)

Here you will get textual information Means each legally required approval process prior placing on the market, importation or putting into service

Conformance document(s) to show compliance to the authority

Here you will get textual information e. g. SDoC, technical documentation (for 10 years), filled-in approval forms (e. g. ACMA in AUT)

Conformance document validity and renewal

Here you will get related hyperlink(s) Validity for Conformance document name mentioned. For mandatory certification validity is important.

Which documents are required by an approval body?

Here you will get textual information e .g. formal application

Is a factory inspection legally required

Here you will get textual information

Hints

Here you will get textual information Specific recommendations, information or most common mistakes

Testing & Standards

Specific requirements for testing

Here you will get textual information e. g. is an accredited test lab. mandatory, limits, test samples, product description

General information to the application of standards

Here you will get textual information e. g. China: GB standards are mandatory, EU: harmonized standards shall be published in the OJEU with respect to "presumption of conformity"

Is in-country testing legally required?

Here you will get textual information

Acceptance of foreign test reports

Here you will get textual information

Hints

Here you will get textual information Specific recommendations, information or most common mistakes

Regulatory labelling, markings and user information

Regulatory label (mandatory)

Here you will get textual information e. g. product label

Regulatory e-labelling allowed?

Here you will get textual information e. g. put the regulatory information and labels in a software menu

Required information on the product and/or packaging

Here you will get a image or chart e. g. address of the manufacturer/importer, serial number

User instructions language(s)

Here you will get textual information Regulated by the legal provisions

User instruction requirements and specific compliance notes

Here you will get textual information Form, sentence inside, simple text. E. g. FCC/ISED compliance information, SAR information, battery, environmental information like waste

Hints

Here you will get textual information Specific recommendations, information or most common mistakes

Code, Continent	CAN, America
Economic Area	APEC
Official Language	English; French - Official Languages Act (R.S.C., 1985, c. 31 (4th Supp.)) | https://laws-lois.justice.gc.ca/eng/acts/o-3.01/fulltext.html
Standard Institute	Standards Council of Canada (SCC) | https://www.scc.ca/ Canadian Standards Association (CSA) |https://www.csagroup.org/
HS Codemember	Yes