Regulatory ESSENTIAL



Regulatory ESSENTIALS - modular information package with all the essential information for compliant products in your target market. Conveniently read online at Product-Compliance-Portal ROGER WILLCO.

INMETRO Certification; Medical Devices; medical devices class i; UDI Code; sterile packaging; clinical evaluation; IMDRF; ISO 15223-1 symbol; vigilance;

layoutpicture
Scope: This ESSENTIAL describes the regulatory requirements of medical devices in Brazil, based on the - ANVISA Resolutions - INMETRO Ordinances - Additional information from Brazilian authorities webpages Health products are classified into four risk classes, according to the risk associated with their use: Class I - low risk Class II - medium risk Class III – high risk Class IV – maximum risk. Not in scope of this CRF: - In-Vitro Diagnostica

Stakeholders: Manufacturer, Importer, B2C products, B2B products
Legislation in force: Art. 1 This Resolution defines the rules for risk classification of medical devices, the requirements for labeling and instructions for use, and the procedures for notification, registration, alteration, revalidation and cancellation of notification or registration of medical devices. The description of all classification rules can be obtained in Annex I. (amended by RDC No 777 of 2023:01-MAR-2023) Amendment of RDC No.751:2022 ANVISA RDC No. 665 of 30-MAR-2022 Good Manufacturing Practices for Medical Products and In Vitro Diagnostic Products. Article 1. This regulation provides for the Good Manufacturing Practices (GMP) for Medical Products and In Vitro Diagnostic Products, establishing the requirements that describe the GMP for methods and controls used in the design, purchasing, manufacturing, packaging, labeling, storage, distribution, installation, and technical assistance applicable to the manufacture of medical products and in vitrodiagnostic products. Article 2. This regulation applies to manufacturers, distributors, storers, and importers of medical products and in vitro diagnostic products that are commercialized in Brazil. Definitions: II - quality audit: an established, systematic, and independent examination of a manufacturer's entire quality system, performed at regular intervals and with sufficient frequency to ensure that the quality system’s activities and its results comply with the procedures specified in its quality system. This Resolution provides for inspection programs and establishes criteria for granting and renewing the Certification of Good Manufacturing Practices for Medical Devices - Risk Classes III and IV.

Application national: Brazil, Medical Devices, INMETRO Certification, ANVISA Notification and Registration

Countries: Image for BR Brazil,  
Status: Published 2023-03-28 by Anette Dunkel-Reinboth and Benjamin Kerger
Last change 2024-06-24 by Anette Dunkel-Reinboth: Abbreviations, Medical devices
ROGER WILLCO ID: #yx6c
Price 30 day license for 89.00 € NET net

ANY QUESTIONS?

essentials@globalnorm.de

+49 30 3229027-50




Buy a 30 day license for 89.00 € net now ...




Scope of this ESSENTIAL
This ESSENTIAL describes the regulatory requirements of medical devices in Brazil, based on the
- ANVISA Resolutions
- INMETRO Ordinances
- Additional information from Brazilian authorities webpages

Health products are classified into four risk classes, according to the risk associated with their use:
Class I - low risk
Class II - medium risk
Class III – high risk
Class IV – maximum risk.

Not in scope of this CRF:
- In-Vitro Diagnostica'

Analysis of regulatory requirements

Legislation in force for this PCT
Here you will get a linked document in ROGER WILLCO
(only reachable with additional ROGER WILLCO license)

Are legal provisions regulates the product compliance topic? If yes, what is the reference (title, number)?

Responsible actors
Here you will get textual information

Which actor(s) are responsible for compliance with the legal provisions: e. g. - economic operators (manufacturer, importer, distributor, fulfilment service provider), - user (commercial/industrial/professional), - user (private, consumer)?

Regulatory market access conditions for the actor(s)
Here you will get textual information

What are the main regulatory requirements (e. g. conformity assessment fulfilment of essential requirements of Annex I 2006/42/EC) prior placing on the market, importation and putting into service (brief description)

Exemption clauses
Here you will get textual information

Exempted devices/products or industry sectors.

Sub-federal legislation of states/counties
Here you will get textual information

E. g. by 2019 an Inter-Governmental Agreement (IGA) on governance of the Electrical Equipment Safety System (EESS) has been signed by Queensland, Victoria, Western Australia and Tasmania.

FTA/MRA status with EU
Here you will get a linked document in ROGER WILLCO
(only reachable with additional ROGER WILLCO license)

Has the country signed a Free Trade Agreement (FTA) or a Mutual recognition agreement (MRA) with EU?

Authority
Here you will get textual information

Name of the authority for approval, registration, market surveillance and/or enforcement

Link/Reference to other reference document(s)
Here you will get a linked document in ROGER WILLCO
(only reachable with additional ROGER WILLCO license)

Abbreviations
Here you will get textual information

Important abbreviations which are special for this legislation or theme.

Hints
Here you will get related hyperlink(s)

Specific recommendations, information or most common mistakes

Route to compliance

Formal and administrative requirements

Registration at related authority required?
Here you will get textual information

Product registration? Manufacturer registration? Importer / Representative registration? if required.

Local representative legally required?
Here you will get textual information

[Yes/No]

IMDRF Membership
Here you will get textual information

Established in October 2011, the IMDRF is a forum for medical device regulators from multiple jurisdictions who have agreed to work together to promote international harmonization and convergence in the medical device field. The IMDRF builds on the foundational work of the Global Harmonization Task Force (GHTF), which was established in 1992 with the EU as one of the founding members.

Database Entry required
Here you will get textual information

Equipment authorization (approval process)

Classification Rules
Here you will get textual information

Approval process (conformity assessment procedure)
Here you will get textual information

Means each legally required approval process prior placing on the market, importation or putting into service

Conformance document(s) to show compliance to the authority
Here you will get textual information

e. g. SDoC, technical documentation (for 10 years), filled-in approval forms (e. g. ACMA in AUT)

Conformance document validity and renewal
Here you will get textual information

Validity for Conformance document name mentioned. For mandatory certification validity is important.

Which documents are required by an approval body?
Here you will get textual information

e .g. formal application

Which documents are required by an approval body?
Here you will get a image or chart

e .g. formal application

Is a factory inspection legally required
Here you will get textual information

Testing & Standards

Specific requirements for testing
Here you will get a linked document in ROGER WILLCO
(only reachable with additional ROGER WILLCO license)

e. g. is an accredited test lab. mandatory, limits, test samples, product description

General information to the application of standards
Here you will get textual information

e. g. China: GB standards are mandatory, EU: harmonized standards shall be published in the OJEU with respect to "presumption of conformity"

Source for standards for conformity assessment
Here you will get textual information

Is in-country testing legally required?
Here you will get textual information

Acceptance of foreign test reports
Here you will get textual information

Regulatory labelling, markings and user information

Regulatory label (mandatory)
Here you will get a image or chart

e. g. product label

Regulatory e-labelling allowed?
Here you will get textual information

e. g. put the regulatory information and labels in a software menu

UDI marking
Here you will get a linked document in ROGER WILLCO
(only reachable with additional ROGER WILLCO license)

Required information on the product and/or packaging
Here you will get textual information

e. g. address of the manufacturer/importer, serial number

User instructions language(s)
Here you will get textual information

Regulated by the legal provisions

User instruction requirements and specific compliance notes
Here you will get textual information

Form, sentence inside, simple text. E. g. FCC/ISED compliance information, SAR information, battery, environmental information like waste

Hints
Here you will get textual information

Specific recommendations, information or most common mistakes


Code, ContinentBRA, South America
Economic AreaMERCOSUR/MERCOSUL
Official LanguagePortugese - Constitution of 1988, Article 13 | https://www.jusbrasil.com.br/topicos/10640315/artigo-13-da-constituicao-federal-de-1988
Standard InstituteABNT (Associação Brasileira de Normas Técnicas) | https://www.abnt.org.br/
HS CodememberYes, since 1981






GLOBALNORM COMPLIANCE
GLOBALNORM ACADEMY
GLOBALNORM GmbH

Keep abreast of new and changed requirements and thus act proactively.
Our ACADEMY offers training in a format to suit you – for a direct knowledge transfer from our experts to your company.
Minimize risk, conserve resources, and grow successfully with an understanding of standards and market approval requirements.




Top of the page

© 2024 Globalnorm GmbH